Skip to main content

Never Starts Transmitting

There are a number of reasons why power is not being transmitted.

  1. Check that all input and output connections are properly made, according to those outlined in the Quickstart Guide.
  2. Check that you have attached your coils correctly.
  3. Check that all required solder jumpers have been bridged. This includes the resonant capacitors on both the transmitter and receiver, and either the regulate or bypass solder jumper on the receiver.
  4. Check that the transmitter and receiver configurations are correctly set.
  5. Check for a protection blocking transmission.
    • Invalid Configuration Fault
    • Over Temperature Fault
    • Over Current Fault
    • Over Voltage Fault
  6. Check coil placement
    • Ensure coils are placed in spacer with the wire sides facing each other
    • Ensure distance between coils is not too small or too large